inside-hd-img

Equipment Roster

Summit Drilling customers are privy to one of the largest and most diverse equipment fleets in the drilling industry. Environmental engineering firms benefit from this wide range of capability, as well as Summit’s ability to address multiple project requirements simultaneously.

Click on any piece of equipment listed below for dimensions, capabilities and brief notations on its use.

[+] Roto-Sonic Drill Model: S-27CRS (Sonic)

Dimensions: 20’ x 8h x 9’ w, 15,000lbs
Capabilities: Sonic drilling with continuous core sampling of overburden in difficult terrain. Virtually no use of air, water or mud. Roto-Sonic function produces 1,275 ft/ lbs of Torque, 0-205 rpm, 150 Hz & 22,400 lbs of Force
100-feet of 6”OD casing for 2” wells
100-feet of 8”OD casing for 4” wells
Dual tube sampling capability
Single tube (saturated sand) sampling capability

Scenarios of Use

  • The wide, soft rubber track undercarriage can be used in difficult terrain and difficult access locations. In certain conditions, sonic drilling is two to three times faster than conventional drilling. The speed advantage of sonic drilling over convential drilling is achieved when high frequency vibrations fluidize soil particles at the bit, allowing penetration in most geological formations.

[+] Reichdrill T650W-II (Air)

Dimensions: 35’l x 9’w x 42’h/65,000lbs.
Capabilities: Air Rotary

Scenarios of Use

  • Deep well installation (~600’) in consolidated rock formations using percussion hammer or tri-cone bit

[+] Ingersoll Rand T3W (Air)

Dimensions: 35’l x 9’w x 42’h/65,000lbs.
Capabilities: Air Rotary

Scenarios of Use

  • Deep well installation (~1,000’) in consolidated rock formations using percussion hammer or tri-cone bit

[+] Versa Drill V-1555 (Air/Auger)

Dimensions: 35’l x 9’w x 59’h/60,000lbs.
Capabilities: Air rotary, mud rotary, split spoon sampling

Scenarios of Use

  • Deep well installation (~600’) in consolidated rock formations using percussion hammer or tri-cone bit
  • Deep well installation (~500’) in unconsolidated formations using mud rotary with tri-cone bit or drag bit with split spoon sampling

[+] Gus Pech Brute 1100 (Air/Auger)

Dimensions: 35’l x 9’w x 35’h/58,000lbs.
Capabilities: Air rotary, mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Deep well installation (~600’) in consolidated rock formations using percussion hammer or tri-cone bit
  • Deep well installation (~500’) in unconsolidated formations using mud rotary with tri-cone bit or drag bit with split spoon sampling
  • Shallow well installation (~100’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • HQ/NQ rock coring (~600’) in consolidated formations

[+] Ingersoll Rand T2W (Air/Auger)

Dimensions: 35’l x 9’w x 40’h/60,000lbs.
Capabilities: Air rotary, mud rotary, split spoon sampling

Scenarios of Use

  • Deep well installation (~600’) in consolidated rock formations using percussion hammer or tri-cone bit
  • Deep well installation (~500’) in unconsolidated formations using mud rotary with tri-cone bit or drag bit with split spoon sampling

[+] Mobile B-61HDX (2) (Mud/Auger)

Dimensions: 35’l x 9’w x 35’h/54,000lbs.
Capabilities: Mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Shallow well installation (~200’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • Split boom drilling (~15’ clearance)
  • HQ/NQ rock coring (~600’) in consolidated formations

[+] CME-75 (Mud/Auger)

Dimensions: 35’l x 9’w x 35’h/48,000lbs.
Capabilities: Mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Shallow well installation (~200’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • Split boom drilling (~15’ clearance)
  • HQ/NQ rock coring (~600’) in consolidated formations

[+] Mobile B-59 (Mud/Auger)

Dimensions: 32’l x 9’w x 35’h/48,000lbs.
Capabilities: Mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Shallow well installation (~100’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • Split boom drilling (~15’ clearance)
  • HQ/NQ rock coring (~300’) in consolidated formations

[+] Mobile B-57 (Mud/Auger)

Dimensions: 28’l x 9’w x 30’h/30,000lbs.
Capabilities: Mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • Split boom drilling (~15’ clearance)
  • HQ/NQ rock coring (~100’) in consolidated formations

[+] Marooka ATV Carrier with Mobile B-57 (Mud/Auger)

Dimensions: 28’l x 9’w x 30’h/27,000lbs.
Capabilities: Mud rotary, hollow stem auger, rock coring, split spoon sampling

Scenarios of Use

  • Ideal use in off road environments
  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers with split spoon sampling
  • Split boom drilling (~15’ clearance)
  • HQ/NQ rock coring (~100’) in consolidated formations

[+] Failing 1500 (Mud)

Dimensions: 45’l x 9’w x 45’h/50,000lbs.
Capabilities: Mud rotary, rock coring, split spoon sampling

Scenarios of Use

  • Deep well installation (~700’) in unconsolidated formations using mud rotary with tri-cone bit or drag bit with split spoon sampling
  • HQ/NQ rock coring (~600’) in consodated formations

[+] (2) Geoprobe 7822DT Track (Direct Push)

Dimensions:
Capabilities:

Scenarios of Use

  • 1
  • 2

[+] Geoprobe 6600 Flatbed Truck (Direct Push)

Dimensions: 20’l x 9’w x 13’h/24,000lbs.
Capabilities: Direct Push (5’ stroke), mud rotary, air rotary, hollow stem auger

Scenarios of Use

  • Direct push up to 200’ for soil, groundwater investigation
  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers
  • Shallow well installation (~50’) in consolidated formations using air rotary
  • Shallow well installation (~100’) in unconsolidated formations using mud rotary

[+] Geoprobe 6600 Box Truck (Direct Push)

Dimensions: 20’l x 9’w x 13’h/18,000lbs.
Capabilities: Direct Push (5’ stroke), mud rotary, air rotary, hollow stem auger

Scenarios of Use

  • Direct push up to 200’ for soil, groundwater investigation
  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers
  • Shallow well installation (~50’) in consolidated formations using air rotary
  • Shallow well installation (~100’) in unconsolidated formations using mud rotary

[+] Geoprobe 66DT Track (Direct Push)

Dimensions: 10’l x 5’w x 13’h/4,800lbs.
Capabilities: Direct Push (5’ stroke), mud rotary, air rotary, hollow stem auger

Scenarios of Use

  • Rubber track – ideal for off road and in building/facility operations
  • Direct push up to 200’ for soil, groundwater investigation
  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers
  • Shallow well installation (~50’) in consolidated formations using air rotary
  • Shallow well installation (~100’) in unconsolidated formations using mud rotary

[+] Geoprobe 6620DT Track (Direct Push)

Dimensions: 10’l x 5’w x 13’h/4,500lbs.
Capabilities: Direct Push (5’ stroke), mud rotary, air rotary, hollow stem auger

Scenarios of Use

  • Rubber track – ideal for off road and in building/facility operations
  • Direct push up to 200’ for soil, groundwater investigation
  • Shallow well installation (~50’) in unconsolidated formations using hollow stem augers
  • Shallow well installation (~50’) in consolidated formations using air rotary
  • Shallow well installation (~100’) in unconsolidated formations using mud rotary

[+] Geoprobe 5410 Truck (2) (Direct Push)

Dimensions: 18’l x 9’w x 10’h/15,000lbs.
Capabilities: Direct Push (4’ stroke)

Scenarios of Use

  • Direct push up to 100’ for soil, groundwater investigation

[+] Geoprobe 420M Probe Unit (Direct Push)

Dimensions: 28”l x 24”w x 8’h/375lbs.
Capabilities: Direct Push (3’ stroke)

Scenarios of Use

  • Rubber tire single axle/ideal for indoor use and tight areas/must have separate liquid fuel power unit
  • Direct push up to 30’ for soil, groundwater investigation

[+] Dingo/Geoprobe 5400 Rubber Track Unit (Direct Push)

Dimensions: 8’l x 44”w x 9’h/12,000lbs.
Capabilities: Direct Push (4’ stroke)

Scenarios of Use

  • Direct push up to 30’ for soil, groundwater investigation
  • HSA 4 ¼ to ~20’
Pause Play
Summit Drilling Equipment Roster
Summit Drilling Equipment Roster
Summit Drilling Equipment Roster

81 Chimney Rock Road, Bridgewater, NJ 08807 Phone: 800-242-6648 Fax: 732-356-1009 © Copyright 2012. Summit Drilling Co., Inc.